DCS-200 • User’s Guide
49
4. Operation
Using the Setup Menu
•
Raster Box
— This function enables or disables the raster box on the output.
~
When turned
ON
, the system displays a one-pixel border around the
active output area. Note that the raster box includes gaps that enable
you to precisely align the input video to fill the output raster.
~
When turned
OFF
, the output is clean, without the border.
póåÅ=pÉíìé
From the
Output Menu
, select
Sync Setup
to display the
Output Sync Select Menu
:
Figure 4-14.
Output Sync Select Menu (sample)
The
Output Sync Select
Menu
enables you to independently adjust the output sync
polarity of the Analog and DVI outputs. The following functions are available:
•
Analog Sync
— This field sets the analog output sync polarity.
~
Values
: CSync, -H-V, -H+V, +H-V, +H+V
~
Default
: -H-V
•
DVI Sync
— This field sets the DVI output sync polarity.
~
Values
: -H-V, -H+V, +H-V, +H+V
~
Default
: +H+V
d~ãã~
From the
Output Menu
, select
Gamma
to specify the output Gamma.
•
Adjustment range
: 1.0 to 3.0, in steps of 0.1
•
Default
: 1.0
p~îÉ=lìíéìí=`çåÑáÖ
From the
Output Menu
, select
Save Config
to save the current output configuration. A
message is briefly shown, after which the system returns to the
Output Menu
.
Figure 4-15.
Saving Output Configuration Message
O U T P U T S Y N C S E L E C T
> A n a l o g S y n c
- H - V
D V I S y n c
+ H + V
S a v i n g O u t p u t C o n f i g
