16
DCS-200 • User’s Guide
NK==fåíêçÇìÅíáçå
About the DCS-200
going out, and all analog outputs, plus the freeze and LOGO store
functions are disabled when the DCS-200 processes HDCP content.
Refer to the “
” section on page 17 for more details.
~
1080i RGB input is supported on the DVI digital input.
•
A
Preview
mode lets you view and adjust layers before moving them to Program.
•
The DCS-200 stores and recalls up to three full-screen logos.
•
The system provides true seamless switching between all inputs, including one of
the three stored full-screen logos.
•
An
Auto Take
feature (in the
User Preference Menu
) supports transitioning from
one input source to another without pressing
TAKE
.
•
The following scaling and de-interlacing features are provided:
~
10-bit scaling
~
10-bit 4:2:2 de-interlacer with diagonal filter
~
165MHz maximum pixel rate
~
Low video delay: Interlaced sources, 3 fields (max)
•
The DCS-200 provides the ability to luminance key unscaled DVI sources. Please
note:
~
Keys are set up from the
Key Menu
. The front panel
KEY
button is used
to enable or disable the key transition.
~
Key transitions are performed at the same rate as the full screen source
transitions.
~
If the key source resolution is greater than the output resolution, the
DCS-200 only displays an area equal to the output resolution. This area
is selectable using the menu.
~
If the key source resolution is less than the output resolution, the key is
centered on screen, and can be moved within the screen boundaries.
•
The DCS-200 provides the ability to “auto acquire” input sources. The system
monitors inputs at all times, and if a timing change occurs, the system
automatically reacquires and displays the source — once the timing has been
measured.
•
The DCS-200 offers simple and intuitive menus:
~
Presentations can be switched without accessing any setup menus.
~
Two front-panel lockout modes enable you to lock out menu access,
either completely or partially.
•
The DCS-200 provides an integrated test pattern generator.
•
The DCS-200 offers an HD/SD SDI input as standard.
•
A built-in web-based GUI enables you to perform all setup and transition
functions, just like the front panel.
•
The
File Association
feature provides the ability to save and recall up to 64 input
configuration files, and associate each of them with one or more inputs.
