Barco DCS-200, User Manual

Page: 106 / 170

106 DCS-200 • User’s Guide
5. GUI Operations
GUI Operations
12. The DCS-200 GUI is now ready for use. Refer to the “ GUI Operations ” section
on page 106 for important operating notes.
drf=léÉê~íáçåë
The figure below illustrates a sample GUI screen:
Figure 5-4. DCS-200 GUI Setup Menu
Running the DCS-200 GUI is virtually identical to running the system from the physical front
panel. The similarities are:
•
All control panel sections and menus are the same. In Chapter 4, refer to the
“
Using the Menu System ” section on page 39 for details.
•
All input, transition, and “effect” selection methods are the same. In Chapter 4,
refer to the “
Using Inputs ” section on page 84 for details.
•
All buttons blink states are the same. In Chapter 4, refer to the “ Button States ”
section on page 35 for details.
The differences are:
•
“Click” instead of press.
•
Use the Up/Down arrows in place of the ADJUST knob:
~
Click the Up Arrow to scroll up the menu tree.
~
Click the Down Arrow to scroll down the menu tree.
•
Click “ Home ” to return to the DCS-200 Home Page , if required.
•
All actions taken on the GUI are mirrored on the physical front panel, and
similarly, all actions taken on the front panel are mirrored on the GUI.
•
You can not enter or leave the Front Panel Lockout mode from the GUI.
Note If you have trouble establishing communications between
your PC and the DCS-200, in Chapter 6, refer to the
“
Troubleshooting Ethernet Communication ” section on
page 113 for instructions.