DCS-200 • User’s Guide
67
4. Operation
Using the Setup Menu
After you select a file number and choose
Recall File
, press
SEL
to initiate the recall or
ESC
to continue using the current configuration.
When you press
SEL
, if the input timing matches the timing in the recalled input
configuration file, the input uses the recalled configuration file immediately. The
File
Association
Menu
is also updated to reflect your change.
If the input and configuration file timings do not match and
In Auto Acquire
is
ON
, an “auto
acquire” will be performed. For more information about this function, refer to the
“
hÉó=pÉíìé=jÉåì
A luminance key is a video effect in which one video source cuts into a background image.
The "key source" is essentially an electronic hole which is cut into a background image, as
shown in the following illustration. In this illustration,
DCS-200
is the key, which cuts into
the background image.
Figure 4-36.
Example of a Key
In the DCS-200, the key hole is filled with video from one of the two DVI digital input
sources (inputs
7
and
8
). You cannot use an analog input as a key source.
From the
Setup Menu
, select
Key Setup
to display the
Key Setup Menu
, which enables
you to select a digital key source and set key parameters. If
Menu Context
is
ON
, the
menu appears automatically when the
KEY
button is pressed.
Figure 4-37.
Key Setup Menu (sample)
K E Y S E T U P
> I n p u t
D V I _ 7
C l i p
0
G a i n
1 . 0 0
O p a c i t y
1 0 2 3
H O f f s e t
0
V O f f s e t
0
