4. Connections
Lamp run time indication while running
When the total run time of the lamp is 30 hours less then 1000 or 1500 (depending on lamp type), the following warning message
will be displayed for 1 minute. This warning message will be repeated every 30 minutes. Press
EXIT
to remove the message before
the minute is over.
Image 4-2
When the total run time of the lamp is 1000 or 1500 (depending on lamp type) hours or more, the following warning message, with
the exact run time is displayed on the screen.
WARNING
Lamp run time is x hours
operating the lamp longer
than x hours may damage
the projector.
Please replace the lamp
<ENTER> to continue
Menu 4-1
Lamp run time is 1000 or 1500 (depending on lamp type) hours. Operating the lamp longer than 1000 hours may damage the
projector. Please replace the lamp.
When
ENTER
is pressed to go on, the warning will be repeated every 30 min.
The total lifetime of the lamp for a safe operation is 1000 or 1500 (depending on lamp type) hours max. Do not use it longer. Always
replace with a same type of lamp. Call a BARCO authorized service technician for lamp replacement.
Using a lamp for more than 1000 or 1500 (depending on lamp type) hours is dangerous as the lamp could
explode.
Lamp Light Output Indication
When starting up and the center lumens measurement is lower than 50 % of its initial value, the lamp light output warning will be
displayed. Press
ENTER
to continue. The message will not be repeated during operation.
WARNING
Lamp run time is X hours
The light output of the lamp
is less
than 50% of its initial value.
It is advisable to replace the
lamp
before damage occurs.
<ENTER> to confirm
Menu 4-2
When the ’Constant Light Output’ (CLO) options is installed, the light output message will appear on the screen when the light output
is reduced with 33% from its initial value.
This message will be repeated every hour.
4.3 Switching to standby
How to switch to standby?
1. Press
Standby
to switch the projector to standby.
26
R5976483 BARCOSLM R6 17092002
Summary of Contents for BARCOSLM R6
