Barco BARCOSLM R6, Owner'S Manual

Page: 125 / 129

B. Barco Control Manager
Set up
To set up the time and date, handle as follow :
1. Select the time zone by clicking on the corresponding time zone in the Time zone list. (image B-16)
2. Select ’
Network time
’ by checking the
Use NTP server
box and fill out the IP-address of your local NTP server. This server gives
normally the GMT time, but due to time zone indication, the correct time will be filled out in the time and date text box after
Apply
is click.
The ’Time’ and ’Date’ area will be grayed out but filled out with the correct time and date. The current time on projector will be
adapted.
Or,
Fill out the time and date text box with the following mask :
Time : hh:mm
Date : dd-mm-ccyy
The NTP server address box will be grayed out.
3. When summer time is active in your region and the time setting set up via the network time, check ’Daylight saving time’ to obtain
the correct time setting during the summer.
4. Click on Apply to activate.
The current time on projector will be adapted.
Image B-16
Date & time set up
Each time the projector is powered down, the date & time settings has to be filled out again when chosen for
the second method.
B.5.5 Settings
What can be done
The projector nick name, location, SMTP server address and Lamp warning message time can be filled in.
R5976483 BARCOSLM R6 17092002 121