Barco BARCOSLM R6, Owner'S Manual

Page: 123 / 129

B. Barco Control Manager
Factory fitted administrator user name and password are twice ’admin’. The system administrator can change the administrator user
name and password. Once your password is correctly entered, all items in the configuration menu are available.
B.5.2 Mail Set up
What can be done
3 mail addresses can be configured to send feedback about the status of the projector at different time intervals . The content of the
mail can be selected during configuration of the mail setup.
Set up
To set up a mail configuration, handle as follow :
1. Select one of the headings
’Mail 1’
,
’Mail 2’
or
’Mail 3’
. (image B-14)
2. Fill out the E-mail address with an existing E-mail address.
3. Select the content options by selecting the appropriate options.
The following options are available :
- General Status (contains Projector type, Serial number, Software version, Configuration, Projector runtime, Lamp runtime)
- Job log
- Lamp Warnings
- Advanced diagnostics (contains I²C errors)
4. Fill out the timing options.
Select the desired timing by clicking in the drop down box next to the e-mail address box.
The following options are possible :
- Daily : fill out the exact hour in the at area.
- Weekly : fill out the exact hour in the ’at’ area and select a day (or days) out of the list.
- Monthly : fill out the exact hour in the ’at’ area and select the day of the month in the ’every monthly’ area.
5. Click ’Apply’ to finish the configuration.
6. To send an E-mail immediately, click on ’Send now’.
Image B-14
Mail configuration
Repeat the above steps for the other mail configurations if necessary.
B.5.3 Security
What can be done
The administrator can add or change the advanced user password and the administrator password.
R5976483 BARCOSLM R6 17092002 119