Barco BARCOSLM R6, Owner'S Manual

Page: 74 / 129

7. Random Access Adjustment Mode
7.5.4 Scenergix
How to activate Scenergix?
1. Push the cursor key
↑
or
↓
to highlight
Scenergix
. (menu 7-46)
2. Press ENTER to select.
3. Push the cursor key
↑
or
↓
to highlight
Status
. (menu 7-47)
4. Press ENTER to toggle between ON and OFF.
ON scenergix is active
OFF scenergix is not active
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
SCENERGIX
PIP
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-46
SCENERGIX
STATUS [ON]
- size -
TOP
BOTTOM
LEFT
RIGHT
- black level -
LEVEL
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-47
7.5.5 ScenergiX overlap zone (horizontal scenergix)
Definitions
Image 7-10
Scenergix set up
Overlap : number of pixels that overlap
Horizontal resolution of 1 projector : 1024 for Graphics versions, 1280 for Reality versions.
Total horizontal screen resolution : [(horizontal resolution of 1 projector) x 2] minus overlap.
Horizontal Resolution source : number of active pixels of the source.
Adjustment of Active pixels (Pact) of the first projector
1. Go to File –> Edit menu of first projector.
2. Enter value for horizontal
→
active (= Pact) as follow :
Pact = [(Horz. resolution of 1 projector)/(Total horz. screen resolution)] x (horz. resolution source)
3. Horizontal
→
start (= Pstart) remains the same.
70 R5976483 BARCOSLM R6 17092002