barbas ENERGA 80-50, Installation Instructions Manual

Page: 51 / 76

51
ENERGA 80-50
When setting the fi re, move the locking slider all the way to the right.
If necessary, leave the door ajar for 10 minutes. Do not open the door wide, as the
window will remain cold. If the door is shut during this time, smoke will condense on the
glass and form soot.
Move the air supply slider all the way to the right “
+ ” only when starting the fi re.
Prevent white glow and over-fi ring.
7.3 INSTRUCTIONS WHILE STOKING
After approx. 10 minutes, the fi re will be burning fi ercely. You can now top it up with a
few larger blocks of wood. Move the locking slide all the way to the left when the blocks
are burning well and close the door.
Using the air supply slider you can now adjust the air supply for further combustion.
Make sure the fi re burns quietly.
Note: Once you have got the fi re going, leave the air supply slider in the centre position
for optimal combustion. Your fi re will then be much cleaner and more effi cient (more
heat, less topping up).
Centre position
Control range of primary air supply
Control range of secondary and
tertiary air supply
Combustion air supply slider