barbas ENERGA 80-50, Installation Instructions Manual

Page: 50 / 76

50
ENERGA 80-50
7 USE
7.1 VENTILATION
Air is a vital component of the combustion process. Ensure that there is a suffi cient
supply of fresh air. For each kilo of wood that you put on the fi re (door closed), 10 - 15 m
3
of extra air is needed. That means 50 m 3 per hour! As you can see, a plentiful supply of
air is essential. Fresh air supply opening : minimal Ø125 mm.
7.2 GETTING THE FIRE GOING
When you start the fi re, the chimney is still cold and there is little draught. This means
that the chimney’s capacity to draw in air is limited. That is why the air supply has to be
assisted by opening the locking slider (and/or the door) and air supply slider. Use dry,
fi ne wood and some scrunched-up paper or fi relighters to start the fi re.
Locking slider for operating pin of fl ue gas fl ap (inside of door).
Locking slider all the way to the left (closed):
Flue gas fl ap operation works normally:
Door open
Pin comes forwards Flue gas fl ap open
Door closed Pin is pressed in by the door Flue gas fl ap closed
Locking slider all the way to the right (open):
Flue gas fl ap always remains open !!
open close