27
ENERGA 80-50
4
FITTING THE FIREPLACE
4.1 PREPARATION / INSPECTION OF FUNCTION
• Check the operation of
the combustion air supply slider
• Check the operation of
the
fl ue gas fl ap
• Check whether the convection holes Ø125 mm (2x or 4x) on the top side are open
• Check whether at least one of the convection intake openings under or on the side of
the appliance is open
• Check that the fan, once fi tted, is in working order (if present)
If a fan is fi tted, we advise breaking open the holes (convection air intake openings)
on both sides
Positioning of the fi replace
The fi re must be positioned on a concrete surface. If such a surface is not immediately
available, a suffi ciently solid pedestal of noninfl ammable material should be built from
the creeping space.
The appliance can be placed in position using the carrying brackets supplied.
Summary of Contents for ENERGA 80-50
