barbas ENERGA 80-50, Installation Instructions Manual

Page: 12 / 76

12
ENERGA 80-50
• Follow the instructions issued by your local fi re brigade.
The fi re can be taken in operation if national and local regulations are satisfi ed. The
required constructive adaptations should be satisfi ed as well.
Installation Instructions
• Wood and wood briquettes may be stoked in the fi re.
Coals can’t be burned in the fi re.
•
Never
use the appliance to burn rubbish.
• Please read all instructions/stickers on and around the appliance.
• Please also study the directions for use before using the appliance for the fi rst time.
When you fi rst fi re up your appliance, there are a number of extra points you should
take into account. See chapter 6.
• In transit, some parts of the appliance may have moved from their original place.
Check that the door opens and closes, the particulate fi lter and retardant plate (brake
plate) are fi tted correctly to the brackets at the top of the fi re, the side-panels are
fi xed to the walls and the bottom plates have not moved. Check whether the grate is
lying correctly and there are no foreign objects in the ashtray.
• Avoid over-loading (white burning glow), caused, for example, by lengthy burning
with a fully open primary air vent (combustion air supply slider all the way to “ + ”),
or by burning too much wood in one go. The fi re can then become over-heated.
The grate, particulate fi lter and the metal fl ue gas fl ap could then be damaged.
• The appliance may only be set up if the appliance and location meets the
- national and local installation regulations;
- local fi re brigade regulations and required architectural provisions.