17
ENERGA 80-50
• Connecting convection air intake - under or at the side
of the appliance.
°
The convection air intake opening underneath the
appliance is open when it leaves the factory.
Convection air intake under the appliance
°
If you wish to use the convection air intake
openings on the side, you must break out
the hole using a hammer.
Breaking out an opening on the side
Note !!
Only one of the holes is needed.
If a fan is fi tted, we advise breaking
open the holes (convection air
intake openings) on both sides.
• Ventilation casing / fi replace.
Ensure that the casing/fi replace has suffi cient ventilation openings (See
Chapter 2.4; The casing/fi replace and Chapter 4.1).
Summary of Contents for ENERGA 80-50
