Programmable Safety Controller SCR P
www.bernstein.eu
- Tel: + 49 571 793 0
55
DCD Device Properties (where applicable):
•
Name
—input device name; generated automatically and can be changed by the user
•
I/O Terminals
—the assignment of input terminals for the selected device on the selected module
•
Number of Devices
(required)
—the number of DCD sensors used in the application
•
Position, Name, and Type
—the position, name, and type (Door Switch) of DCD sensors used in
the application
•
Debounce Times
—the signal state transition time
7.2.2 Adding Status Outputs
1.
On the
Equipment
tab, click
below the module which will have the status monitoring.
2.
Click
Status Outputs
to add status monitoring
8
.
8
Status outputs can be configured when the state of an input device or an output needs to be communicated. The IOx terminals are used for these
status signals.
Note:
If the entire chain consists of only door switches, the configuration rules for a gate
switch apply.
Figure 36: Advanced DCD Device Settings
Figure 37: Status Outputs
