Programmable Safety Controller SCR P
178
www.bernstein.eu
- Tel: + 49 571 793 0
The project is created.
4. On the
Equipment
tab, click
below the Safety Controller.
The
Add Equipment
window opens.
5. Add an Emergency Stop button and click
OK
to accept the default settings.
6. Click
.
7. Add an Optical Sensor and click
OK
to accept the default settings.
8. Click
.
9. Add a Gate Switch and click
OK
to accept the default settings.
10. Go to the
Wiring Diagram
tab and notice the terminals that are used.
Note:
Make sure that
Disable Automatic Terminal Optimization Feature
checkbox is selected.
Figure 126: Disable Automatic Terminal Optimization Feature Selected
