Programmable Safety Controller SCR P
www.bernstein.eu
- Tel: + 49 571 793 0
157
Figure 108: TIA - Hardware Catalog
The system installs the Safety Controller GSD file and places it in the
Hardware catalog
. In the above example, the
Safety Controller GSD file is located under
Other field devices
>
PROFINET IO
>
I/O
>
BERNSTEIN AG
>
BERNSTEIN
.
Changing the Device IP Address
Use these instructions to change the IP address of the Safety Controller device, using the Siemens TIA Portal (v13)
software. Use these instructions as a basis if you are using another controller (PLC).
1. Start the Siemens TIA Portal (v13) software.
2.
Click
Open existing project.
3. Select a project an open it.
4. Click
Devices & networks
after the project has been uploaded to go to
Network view
.
Figure 109: TIA - Network View
Network View
displays.
5. Double-click on the Safety Controller icon to open the
Device view
.
Note:
If the Safety Controller GSD file does not install properly, save the log and contact
Bernstein AG
