11 / 46
51376-010 GB/2020-10
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
• When connecting a changeover contact (toggle function) to connector 1, the make time
must be > 100 ms.
b) RS 232 interface connection
The RS 232 interface connection is located on the rear side of the ultrasonic generator.
For connection and communication purposes, a standard serial conductor (RS 232) can be
used. Implementation of the technical programs required for communication is the responsibility
of the operator and is not supported by the manufacturer. The manufacturer only guarantees
the proper functioning of the interface.
The instruction set for the RS-232 interface will be made available by the manufacturer free of
charge, upon request.
Important:
Proper operation will depend on the length of the connection cable. If an extension is used, a
length of 5 m may not be exceeded.
Caution:
The inputs and outputs of the remote control connector and RS-232 interface may only be
connected with devices of protection class I that are connected to the same mains supply circuit.
Summary of Contents for Sonoplus HD4050
Page 44: ......