BANDELIN Sonoplus HD4050, User Instructions

Page: 18 / 46

Prog 1* Ampl 10%
Time set 00:02:15
elapsed 00:00:00
Pulse 4.0s 4.0s
Stop at
0°C ---°C
Energy 0.000 kJ
4
Prog 1* Ampl 10%
Time set 00:02:15
elapsed 00:00:00
Pulse 5.1s 4.0s
Stop at
0°C ---°C
Energy 0.000 kJ
4
Prog 1* Ampl 10%
Time set 00:02:15
elapsed 00:00:00
Pulse 5.1s 4.0s
Stop at
0°C ---°C
Energy 0.000 kJ
4
Prog 1* Ampl 10%
Time set 00:02:15
elapsed 00:00:00
Pulsation off
Stop at 0°C ---°C
Energy 0.000 kJ
Pulsation 4.0s 4.0s
18 / 46 51376-010 GB/2020-10
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
3.2.2 Pulsation [Pulsation] /4
In addition to setting the pulse turn-on time t
E
and the pulse turn-o ff time t
A
, two additional
operating modes can also be set:
o ff no pulsation or continuous sound
by hand key it is possible to pulse manually with the key on the ultrasonic converter.
Ultrasound operation will be active as long as the key on the ultrasonic converter
is pressed.
a) Setting the operating modes
SET
Prog 1* Ampl 10%
Time set 00:02:15
elapsed 00:00:00
Pulsation off
Stop at 0°C ---°C
Energy 0.000 kJ
Pulsation off
Prog 1* Ampl 10%
Time set 00:02:15
elapsed 00:00:00
Pulsation off
Stop at 0°C ---°C
Energy 0.000 kJ
Pulsation by handkey
Prog 1* Ampl 10%
Time set 00:02:15
elapsed 00:00:00
Pulsation off
Stop at 0°C ---°C
Energy 0.000 kJ
Pulsation 4.0s 4.0s
b) Setting the time intervals
The maximum setting value is 600.0 s. The minimum setting value will depend on the type of
device and ranges between 0.1 and 0.3 s.
Turn-on time t
E
Turn-o ff time t
A
START
STOP
back to stand-by mode
SET
proceed to next operating parameter
/4 The pulse period duration is the sum of the turn-on and turn-o ff time t = t
E
+ t
A