BANDELIN Sonoplus HD4050, User Instructions

Page: 29 / 46

Dismounting Assembly
Sickle spanner
HS 40/42
Spanner
here: Spanner SW 10
29 / 46 51376-010 GB/2020-10
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
4.3.1.2 Mounting and dismounting of titanium probes
On UW 100/200, titanium probes (TS ...) are mounted onto standard/booster horn SH 100 G/
SH 200 G. On UW 50 they are directly mounted
 First, carefully wipe the mounting surfaces of the standard/booster horn and the probe

ensure clean mounting surfaces.
 Screw on the probe by hand.

Lay the probe on an approx. 20 mm thick base so that it does not bend.
 Firmly hold the standard/booster horn in place using sickle spanner HS 40/42, and tighten the
probe using the appropriate spanner, see illustration. It is recommended to the use the torque
wrench DMS 10.
Note: Observe the torque. - see product information
 With the UW 50 use sickle spanner HS 25/28 - the probe is mounted directly onto the UW 50.
 Dismount in the reverse order.