27 / 46
51376-010 GB/2020-10
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
4.3.1
Mounting and dismounting of the probes
Probes
• are screwed onto the standard/booster horns or directly onto the ultrasonic converter,
• transmit ultrasonic power into the medium to be sonicated,
• are made of high-strength titanium alloy.
Caution !
Probes are sensitive to shock.
Before mounting the probes, the ultrasonic generator must be turned o
ff
and the ultrasonic
converter must be disconnected from the ultrasonic generator.
The mounting surfaces
/5
must be thoroughly cleaned so that the
amplitude and/or power can be transmitted to the medium.
If the mounting surfaces are not cleaned, the probe and the
standard/booster horn could be ruined as a result.
Note
The tool required for mounting/ dismounting is included in the scope of supply.
/5 The
mounting surfaces are the contact surfaces between the standard/booster horn and the probe.
Summary of Contents for Sonoplus HD4050
Page 44: ......
