BANDELIN Sonoplus HD4050, User Instructions

Page: 19 / 46

19 / 46 51376-010 GB/2020-10
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
3.2.3 Temperature monitoring [Temperature]
The temperature in the sonicating medium can be monitored using the temperature sensor. The
following functions can be set:
o ff no monitoring
stop if the temperature falls below the limit value once again, the ultrasound operation will
be turned o
ff . If the temperature falls below the short of the limit value once again, the
ultrasound operation will not automatically continue.
alarm when reaching or exceeding the set temperature limit value, an acoustic and visual
warning signal (red blinking LED) will be triggered. The ultrasound operation will not be
turned o
ff .
a) Setting the type of monitoring
SET
Prog 3* Ampl 10%
Time set 00:00:15
elapsed 00:00:00
Pulsation off
Temperature ---°C
Energy 0.000 kJ
Temperature ---°C
Prog 3* Ampl 10%
Time set 00:00:15
elapsed 00:00:00
Pulsation off
Alarm at 0°C ---°C
Energy 0.000 kJ
Alarm at 0°C ---°C
Prog 3* Ampl 10%
Time set 00:00:15
elapsed 00:00:00
Pulsation off
Stop at 0°C ---°C
Energy 0.000 kJ
Stop at 0°C ---°C
Example:
SET
Prog 3* Ampl 10%
Time set 00:00:15
elapsed 00:00:00
Pulsation off
Temperature ---°C
Energy 0.000 kJ
Temperature ---°C
Prog 3* Ampl 10%
Time set 00:00:15
elapsed 00:00:00
Pulsation off
Alarm at 0°C ---°C
Energy 0.000 kJ
Alarm at 0°C ---°C
Prog 3* Ampl 10%
Time set 00:00:15
elapsed 00:00:00
Pulsation off
Alarm at 0°C ---°C
Energy 0.000 kJ
Alarm at 60°C ---°C
Prog 3* Ampl 10%
Time set 00:00:15
elapsed 00:00:00
Pulsation off
Alarm at 0°C ---°C
Energy 0.000 kJ
Stop at 60°C ---°C
Prog 3* Ampl 10%
Time set 00:00:15
elapsed 00:00:00
Pulsation off
Stop at 0°C ---°C
Energy 0.000 kJ
0°C
Prog 3* Ampl 10%
Time set 00:00:15
elapsed 00:00:00
Pulsation off
Stop at 0°C ---°C
Energy 0.000 kJ
60°C
The maximum setting value is 120 °C, the minimum is -10 °C.
As shown in the example, the values for the Alarm and Stop functions are carried over when
de
fi ning a limit temperature. An Alarm is triggered simultaneously in Stop mode.
Temperature measured at
temperature sensor
No sensor: ---°C
Prog 1* Ampl 20%
Time set 00:01:00
00:00:09
Pulsation 4.0s 4.0s
Temperature 31°C
Energy 0.000
kJ
SET
or
START
STOP
back to stand-by mode