Balluff BIS M-4 045 0 07-S4 Series, Operating Manual

Page: 76 / 202

8
The BIS M-4xx_ _ read/write device, together with other components of the BIS M, form the
identification system.
They may only be used for this purpose in an industrial environment corresponding to Class A of
the EMC law.
This description applies for the read/write devices of the BIS M-4_ _ series with IO-Link interface
Installation and Startup
Installation and startup are to be performed by trained technical personnel only. Any damage
resulting from unauthorized manipulation or improper use voids the manufacturer's guarantee
and warranty.
When connecting the read/write device to an external controller, pay attention to the choice and
polarity of the connection as well as the power supply.
The read/write device must only be powered using approved power supplies
(see "Technical
Data" starting on page 24) .
Caution!
This is a Class A device. This device may cause RF disturbances in residential areas;
in such a case the operator may be required to take appropriate countermeasures.
Operation and testing
The operator is responsible for ensuring that locally applicable safety regulations are observed.
In the event of defects and non-correctable faults in the identification system, take the system
out of service and secure it to prevent unauthorized use.
Caution!
The pictogram used with the word "Caution" warns of a situation that could harm
someone's health or damage equipment. Failure to observe these warning notes
may result in injury or damage to equipment.
►
Always observe the described measures for preventing this danger.
2.1 Intended use
2.2 General Safety
Notes
2.3 Meaning of
Warning Notes
2
Safety
BIS M-4 _ _ IO-Link Device
Read/Write Device