Balluff BIS M-4 045 0 07-S4 Series, Operating Manual

Page: 74 / 202

6
This manual describes the read/write device of the BIS M-4_ _ identification system with IO-Link
interface and includes commissioning instructions for immediate operation.
This manual does not describe:
– The startup, function and safe operation of the host device (PC, PLC, IO-Link master).
– The installation and function of accessories and expansion devices.
The manual is organized so that the sections build on each other.
Chapter 2: Basic Safety Information.
Chapter 3: The key steps for installing the identification system.
Chapter 4: Introduction to the material.
Chapter 5: Technical data for the read/write device.
Chapter 6: Basics on the IO-Link communications standard.
Chapter 7: User-defined settings for the read/write device.
Chapter 8: Integration into a fieldbus system using Profibus as an example.
Chapter 9: Processor and host system interaction.
The following conventions are used in this manual.
Enumerations are shown as a list with an en-dash.
– Entry 1.
– Entry 2.
Action instructions are indicated by a preceding triangle. The result of an action is indicated by
an arrow.
►
Action instruction 1.
⇒ Action result.
►
Action instruction 2.
Numbers:
– Decimal numbers are shown without additional indicators (e.g. 123),
– Hexadecimal numbers are shown with the additional indicator
hex
(e.g. 00
hex
).
Parameters:
Parameters are shown in italics (e.g. CRC_16 ) .
Directory paths:
References to paths where data is stored or to be saved are shown in small caps (e.g. P
roject
:\
D
ata
t
yPes
\U
ser
-D
efineD
).
Cross-references indicate where additional information on the topic can be found (see "Technical
Data" starting on page 24) .
1.3 About This
Manual
1.4 Structure of the
Manual
1.5 Typographical
Conventions
Enumerations
Actions
Syntax
Cross-references
1
User Instructions
BIS M-4 _ _ IO-Link Device
Read/Write Device