Balluff BIS M-4 045 0 07-S4 Series, Operating Manual

Page: 91 / 202

www.balluff.com 23
Mifare
Balluff data
carrier type
Manufac-
turer
Description Memory
capacity
Usable
bytes with
CRC
Memory
type
BIS M-1_ _-01 NXP Mifare Classic 752 bytes 658 bytes EEPROM
BIS M-1_ _-10 NXP Mifare Classic 736 bytes 644 bytes EEPROM
Note
Data carriers cannot be used with BIS M-4_ _-0_ _-401-…, read/write devices.
ISO15693
Balluff data
carrier type
Manufac-
turer
Description Memory
capacity
Usable
bytes with
CRC
Memory
type
BIS M-1_ _-02 Fujitsu MB89R118 2000 bytes 1750 bytes FRAM
BIS M-1_ _-03 NXP SL2ICS20 112 bytes 98 bytes EEPROM
BIS M-1_ _-04 Texas Inst. TAG-IT Plus 256 bytes 224 bytes EEPROM
BIS M-1_ _-05 Infineon SRF55V02P 224 bytes 196 bytes EEPROM
BIS M-1_ _-06 EM EM4135 288 bytes 252 bytes EEPROM
BIS M-1_ _-07 Infineon SRF55V10P 992 bytes 868 bytes EEPROM
BIS M-1_ _-08 NXP SL2IC553 160 bytes 140 bytes EEPROM
BIS M-1_ _-09 NXP SL2ICS50 32 bytes 28 bytes EEPROM
BIS M -1_ _ -11* Balluff BIS M-1 8192 bytes 7168 bytes FRAM
BIS M -1_ _ -13* Balluff BIS M-1 32768 bytes 28672 bytes FRAM
BIS M -1_ _ -14* Balluff BIS M-1 65536 bytes 57344 bytes FRAM
BIS M -1_ _ -15* Balluff BIS M-1 131072 bytes 114688 bytes FRAM
BIS M-1_ _-20 Fujitsu MB89R112 8192 bytes 7680 bytes FRAM
* Can only be used in conjunction with BIS M-4_ _-0_ _-401-…read/write device
Advantages of IO-Link:
– Uniform, simple wiring of different devices
– The host system can be used to change the device parameters
– Remote querying of diagnostic information is possible
– Centralized data retention of the device parameters is possible
The manufacturer-specific standard IO-Link sends not only the actual process signal, but also all
relevant parameter and diagnostic data on the process level over a single standard cable.
Communication is based on a standard UART protocol with 24V pulse modulation; no separate
power supply is required.
The BIS M IO-Link uses three-conductor technology (physics 2) and operates with a transfer rate
of 38400 (COM2). The data quantity of the process data is 10 bytes
(BIS M-4 _ _ -045-00 _ -07-S4) or 32 bytes (BIS M-4 _ _ -072-00 _ -07-S4) in each direction
(see
chapter 9 "Process data" on page 48) .
4.7 Supported Data
Carrier Types
4.8 IO-Link Basic
Knowledge
4
Basic Knowledge
BIS M-4 _ _ IO-Link Device
Read/Write Device