Balluff BIS M-370-000-A02, Manual, Page: 56 / 198

INSTALLATION
49
2
To configure and control the BIS M-628-075-A01-03-ST34 processor unit and send RFID
commands for testing purposes, download and install the
Balluff Dashboard™ Configuration
Tool from www.balluff.com . The Dashboard Configuration Tool uses the PC RS232 serial
port to communicate to the processor unit
’s RS232 serial port. To enable communication:
1. To connect the processor unit
’s RS232 serial port to the PC you have two choices; the
first one is the quickest: a) Connect the BCC0H0W M12 8-pin female connector to the
M12 8-pin male interface connector on the BIS M-628_. Connect the BCC0H0W 9-pin
female D-sub connector to an RS232 COM port on the host computer, or, b) Build your
own communication cable using the BCC0A03 connector M12 8-pin female connector
and follow the schematic shown in par. 2.3.6.
2. On the host computer, set COM port parameters to: 9600 baud, 8 data bits, 1 stop bit, no
parity and no handshaking.
Run the
Dashboard™ Configuration Tool.