Balluff BIS M-370-000-A02, Manual, Page: 119 / 198

BIS M-62_ MANUAL
112
8
NOTE
The 1756-DNB/A is a Series A DeviceNet Bridge / Scanner Module.
After updating the software, the Controller should be recognized on the
network and the device name, “63, Cobalt DN Controller”, should be
displayed under “Available Devices.”
4. Highlight the
Controller in the Available Devices list, and add it to the Scanlist field on the
right hand side of the dialogue box. Click “
Apply
” and then “
OK
.”
The Controller will be added to the list of DeviceNet hardware in RSNetWorx.
5. Next, select the
Controller from the list of DeviceNet hardware and edit its I/O
Parameters. Set the Input Size and Output Size parameters according to your application
requirements, then click “
OK.
” In the example below, 30 input bytes and 30 output bytes
will be scanned per polling cycle.
NOTE
Strobed mode is not supported by the BIS M-623-071-A01-03-ST30.