Balluff BIS M-370-000-A02, Manual, Page: 54 / 198

INSTALLATION
47
2
To configure and control the BIS M-622-070_ processor unit and send RFID commands for
testing purposes, download and install the Balluff Dashbo
ard™ Configuration Tool from
www.balluff.com . The
Dashboard™ Configuration Tool uses the PC RS232 serial port to
communicate to the processor unit
’s RS232 serial port. To enable communication:
1. To connect the processor unit
’s RS232 serial port to the PC you have two choices; the
first one is the quickest: a) Connect the BCC0H0W M12 8-pin female connector to the
M12 8-pin male interface connector on the BIS M-62_. Connect the BCC0H0W 9-pin
female D-sub connector to an RS232 COM port on the host computer, or, b) Build your
own communication cable using the BCC0A03 connector M12 8-pin female connector
and follow the schematic shown in par. 2.3.5.
2. On the host computer, set COM port parameters to: 9600 baud, 8 data bits, 1 stop bit, no
parity and no handshaking.
Run the
Dashboard™ Configuration Tool.