Balluff BIP LD2-T017-01-EP-S4 Series, User Manual

Page: 47 / 212

6
IO-Link interface (continued)
6.6 Sensor-specific parameters
Index
hex (dec)
Subindex
hex (dec)
Parameters Data format
(length)
Access Value range/
(preset value)
Comments
0x0052
(82)
0x00 (0) Device Temperature int8 (5 bytes) Read only All values
0x01 (1) Device Temperature
Actual
int8 (1 byte) Read only –128…+127
0x02 (2) Device Temperature Min int8 (1 byte) Read only –128…+127
0x03 (3) Device Temperature Max int8 (1 byte) Read only –128…+127
0x04 (4) Device Temperature Min
Lifetime
int8 (1 byte) Read only –128…+127
0x05 (5) Device Temperature Max
Lifetime
int8 (1 byte) Read only –128…+127
0x0053
(83)
0x00 (0) Device Temperature
Thresholds
int8 (2 Byte) Read/Write –128…+127
0x01 (1) Device Temperature
Thresholds Min.
int8 (1 Byte) Read/Write –128
0x02 (2) Device Temperature
Thresholds Max.
int8 (1 Byte) Read/Write 127
0x0057
(87)
0x00 (0) Operating Hours uint32
(12 Byte)
Read only
0x01 (1) Operating Hours total uint32 (4 Byte) Read only
0x02 (2) Operating Hours since
maintenance
uint32 (4 Byte) Read only
0x03 (3) Operating Hours since
startup
uint32 (4 Byte) Read only
0x0058
(88)
0x00 (0) Boot Cycle Counter uint32 (8 Byte) Read only
0x01 (1) Boot Cycles total uint32 (4 Byte) Read only
0x02 (2) Boot Cycles since
maintainance
uint32 (4 Byte) Read only
0x00C1
(193)
0x00 (0) PDV Offset int16 Read/Write –15000…
+32000
0x00C2
(194)
0x00 (0) PDV Preset int16 Read/Write –32000…
+32000
New initial value after
Preset Teach-In
0x00C3
(195)
0x00 (0) PDV Characteristic uint8 Read/Write 0x00 – normal
0xFF – inverted
0x00C4
(196)
0x00 (0) PDV Enable Detection
Range
uint8 Read only (0x00) Function not
implemented
0x4080
(16512)
0x00 (0) MDC Descriptor (7 bytes) Read only
0x01 (1) MDC Low Limit int16 (2 bytes) Read only (0)
0x02 (2) MDC High Limit int16 (2 bytes) Read only (17000)
0x03 (3) MDC Unit Code uint16 (2 bytes) Read only 1010 Unit Code for μm
0x04 (4) MDC Scale int8 (1 byte) Read only –6
Tab. 6-8: Sensor-specific parameters
www.balluff.com 15 english
BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Inductive Positioning System