Balluff BIP LD2-T017-01-EP-S4 Series, User Manual

Page: 167 / 212

6
IO-Link接口 (续)
6.6
传感器专有参数
索引十六进制数
(十进制数)
子索引十六
进制数
(十进制数)
参数 数据格式 (长度) 访问 值域/ (规定值) 备注
0x0052 (82) 0x00 (0) Device Temperature int8 (5个字节) Read only 所有值
0x01 (1) Device Temperature
Actual
int8 (1个字节) Read only –128…+127
0x02 (2) Device Temperature
Min
int8 (1个字节) Read only –128…+127
0x03 (3) Device Temperature
Max
int8 (1个字节) Read only –128…+127
0x04 (4) Device Temperature
Min Lifetime
int8 (1个字节) Read only –128…+127
0x05 (5) Device Temperature
Max Lifetime
int8 (1个字节) Read only –128…+127
0x0053 (83) 0x00 (0) Device Temperature
Thresholds
int8 (2个字节) Read/Write –128…+127
0x01 (1) Device Temperature
Thresholds Min.
int8 (1个字节) Read/Write –128
0x02 (2) Device Temperature
Thresholds Max.
int8 (1个字节) Read/Write 127
0x0057 (87) 0x00 (0) Operating Hours uint32 (12字节) Read only
0x01 (1) Operating Hours total uint32 (4字节) Read only
0x02 (2) Operating Hours since
maintenance
uint32 (4字节) Read only
0x03 (3) Operating Hours since
startup
uint32 (4字节) Read only
0x0058 (88) 0x00 (0) Boot Cycle Counter uint32 (8字节) Read only
0x01 (1) Boot Cycles total uint32 (4字节) Read only
0x02 (2) Boot Cycles since
maintainance
uint32 (4字节) Read only
0x00C1 (193) 0x00 (0) PDV Offset int16 Read/Write –15000…+
32000
0x00C2 (194) 0x00 (0) PDV Preset int16 Read/Write –32000…
+32000
偏移示教时的
新输出值
0x00C3 (195) 0x00 (0) PDV Charakteristik uint8 Read/Write 0x00 – 标准
0xFF – 反转
0x00C4 (196) 0x00 (0) PDV Enable Detection
Range
uint8 Read only (0x00) 功能未实现
0x4080 (16512) 0x00 (0) MDC Descriptor (7个字节) Read only
0x01 (1) MDC Low Limit int16 (2个字节) Read only (0)
0x02 (2) MDC High Limit int16 (2个字节) Read only (17000)
0x03 (3) MDC Unit Code uint16 (2个字节) Read only 1010 用于μm的单位
代码
0x04 (4) MDC Scale int8 (1个字节) Read only –6
表 6-8: 传感器专有参数
www.balluff.com 15
中文
BIP LD2-T017-01-EP _ _ / EP _ _ -S4
电感式位置测量系统