Balluff BIP LD2-T017-01-EP-S4 Series, User Manual

Page: 36 / 212

1.1 Validity
This guide describes the construction, function, and setup
options for the BIP inductive position measuring system
with IO-Link interface. It applies to models
BIP LD2-T017-01-EP _ _ -S4 and
BIP LD2-T017-01-EP _ _ .
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the BIP.
1.2 Symbols and conventions
Individual actions are indicated by a preceding triangle.
►
Instruction 1
Action sequences are numbered consecutively:
1.
Instruction 1
2.
Instruction 2
Note, tip
This symbol indicates general notes.
Numbers
unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x17).
1.3 Scope of delivery
– BIP
– Condensed guide
1.4 Approvals and markings
The CE symbol confirms that our
products comply with the requirements
of the current EU directive.
The BIP meets the requirements of the following product
standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD) EN 61000-4-2 Severity level 3
– Electromagnetic fields (RFI)
EN 61000-4-3 Severity level 3
– Electrical fast transients (burst)
EN 61000-4-4 Severity level 3
– Surge EN 61000-4-5 Severity level 2
– Conducted interference
induced by high-frequency
fields
EN 61000-4-6
Severity level 3
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1.5 Abbreviations
ISDU Indexed Service Data Unit
MDC Measurement Data Channel
PD
Process Data
PDV Process Data Variable
SSC Switching Signal Channel
1
Notes to the user
4 english
BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Inductive Positioning System