Balluff BIP LD2-T017-01-EP-S4 Series, User Manual

Page: 48 / 212

6.7 System commands
Different commands are implemented in the BIP that can
be reached via parameter System Command on index 2,
subindex 0 . Once a system command is transmitted to the
BIP, the command triggers the desired action, provided
that this action is permitted in the current application state.
Command Name Description
0x01 (1) ParamUploadStart Starts parameter upload.
0x02 (2) ParamUploadEnd Ends parameter upload.
0x03 (3) ParamDownloadStart Starts parameter download.
0x04 (4) ParamDownloadEnd Ends parameter download.
0x05 (5) ParamDownloadStore Completes the configuration and starts the data storage.
0x41 (65) SP1 Single Value Teach Saves the currently measured position as Setpoint 1 .
0x42 (66) SP2 Single Value Teach Saves the currently measured position as Setpoint 2 .
0x4E (78) Teach Reset Resets all settings (incl. hysteresis) for the selected teach channel.
0x80 (128) Device Reset Re-initializes all device components (software reset).
0x82 (130) Restore Factory Settings Resets all configurations to the factory setting.
0xA5 (165) Reset Maintenance Resets all maintenance values (condition monitor).
0xE0 (224) Teach Preset Calculates and saves the PDV offset, sets the current output value to the preset
value.
0xE1 (225) Teach Measurement
Range Lower Limit
Teaches in the current position as a lower limit value of the measuring range.
0xE2 (226) Teach Measurement
Range Upper Limit
Teaches in the current position as an upper limit value of the measuring range.
Tab. 6-9: System commands of index 2, subindex 0
6
IO-Link interface (continued)
16 english
BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Inductive Positioning System