Technical Specifications A-1
MN767S
Appendix A
Technical Specifications
Table A-1 VS1STS Specifications
Input Ratings
Voltage
600VAC
Voltage Range
450-660VAC
Phase
Three Phase
Frequency
50/60Hz ±5%
Impedance
1% minimum from mains connection
Output Ratings
Horsepower
1-60HP, 600VAC, 3PH
Overload
Capacity
150% for 1 minute; 175% for 2 seconds
Frequency
0-500Hz
Voltage
0 to maximum input voltage (RMS)
Protective
Features
Trip
Missing control power, over current, over voltage, under voltage, over temperature (motor
or control), output shorted or grounded, motor overload
Stall Prevention
Over voltage suppression, over current suppression
External Output
LED trip condition indicators, 4 assignable logic outputs, 2 assignable analog outputs
Short Circuit
Phase to phase, phase to ground
Electronic Motor
Overload
Meets UL508C (I
2
T)
Environmental
Conditions
Temperature
-10
°
C to 50°C De-rate 3% per degree C above 50
°
C to 55°C maximum surrounding
temperature
Cooling
Forced air
Enclosure
IP20
Altitude
Sea level to 3300 Feet (1000 Meters)
De-rate 2% per 1000 Feet (303 Meters)
above 3300 Feet
Humidity
10 to 90% RH Non-Condensing
Shock
1G
Vibration
0.5G at 10Hz to 60Hz
Storage
Temperature
-20
°
C to +65°C
Duty Cycle
1.0
Control
Specifications
Control Method
V/Hz inverter, Sensorless vector
PWM Frequency
Adjustable 4, 8, 16 or 32kHz
Speed Setting
0-10VDC, 0-20mA; digital (keypad)
Accel/Decel
0-3000 seconds
Velocity Loop
Bandwidth
Adjustable to 180Hz (Control only)
Current Loop
Bandwidth
Adjustable to 1200Hz (Control only)
Analog Output
0-10VDC or 10-0VDC @ 20mA max.; 4-20mA or 20-4mA
Relay Output
30VDC@5A, 250VAC@6A
Summary of Contents for VS1STS Series
