Parameter Descriptions 7-1
MN767S
Chapter 7
Parameter Descriptions
7.1 Overview
Parameters are presented in this Chapter and each setting is explained. Selecting P00 and pressing ENT/PROG accesses a
read-only menu to monitor internal drive values. Once in the display view, the UP and DOWN arrows will scroll between the
read only variables shown in Tables 7-5 and 7-8.
7.2 Basic Parameters - Parameter Group 1
Table 7-1 Basic Parameters - Parameter Group 1
Par
No.
Description
Range
Units
Default
Explanation
P1-01
Motor Rated Voltage
0, 20 to 600
Volts
575
Rated (nameplate) voltage of the
motor (Volts).
P1-02
Motor Rated Current
25% -100% of drive rated current
Amps
Drive
rating
Enter the rated (nameplate)
current of the motor. This value
is used for overload protection.
P1-03
Motor Rated Frequency
25Hz to 2000Hz
Hz
60
Enter the rated (nameplate)
frequency of the motor.
P1-04
Motor Rated Speed
0 to 60000 rpm
Rpm
0
When non-zero, all speed
related parameters are displayed
in rpm. Enter the motor rated
(nameplate) speed if this is
required.
P1-05
Minimum Frequency /
Speed
0.0 to P1-06
Hz or
Rpm
0.0
Minimum speed limit – Hz or
rpm.
If P1-04 >0, the value entered is
in Rpm.
P1-06
Maximum Frequency /
Speed
P1-05 to 5*P1-03
(max 2000Hz)
Hz or
Rpm
60.0
Maximum speed limit – Hz or
rpm.
If P1-04 >0, the value entered is
in Rpm.
P1-07
Terminal / Keypad / PID
/ Drive Control Mode
Selection
0: Terminal control
1: Keypad control – fwd only
2: Keypad control – fwd and rev
3: PID Control
4: Modbus RTU Control
-
0
Primary Control Mode of the
drive.
0: Terminal control
1: Uni-directional keypad
control. Keypad START button
does not reverse direction.
2: Bi-directional keypad control.
Keypad START button toggles
between forward and reverse.
3: User PID control with external
feedback signal.
4: Modbus RTU Control.
P1-08
Digital Input Function
Select
0 to 22
-
0
Defines the function of the
digital inputs depending on the
control mode setting in P1-07.
See Tables 5-3, 5-4, 5-5 and 5-6
for more information.
Summary of Contents for VS1STS Series
