33
Figure 7-2 Maximum Speed Trimpot Range
(Shown Factory Set to 100% of
Frequency Setting)
7.3 ACCELERATION (ACCEL)
Sets the amount of time for the motor to accelerate from zero
speed to full speed. The ACCEL Trimpot is factory set to 1.5
seconds. For a longer acceleration time, rotate the ACCEL
Trimpot clockwise. For more rapid acceleration, rotate the ACCEL
Trimpot counterclockwise. See Figure 7-3.
Note:
Rapid acceleration settings may cause the current limit circuit to
activate, which will extend the acceleration time.
Figure 7-3 Acceleration Trimpot Range
(Shown Factory Set to 1.5 Seconds)
7.4 DECELERATION (DECEL)
Sets the amount of time for the motor to decelerate from full
speed to zero speed. The DECEL Trimpot is factory set to 1.5
seconds. For longer deceleration time, rotate the DECEL Trimpot
clockwise. For more rapid deceleration, rotate the DECEL Trimpot
counterclockwise. See Figure 7-4.
Summary of Contents for ID5601-EO
Page 18: ...18 Figure 2 3 Drive Layout ...