Balanced Body Allegro 2 Reformer, Assembling Manual

Page: 25 / 164

24
8. OPTIONAL FOURTH-SIDE PTB
A fourth side for the PTB can
be ordered separately. To
install, take the PTB off the
frame by removing the T-pins.
Insert the included screws into
the holes as shown in Figure I.
Repeat on the other side then
re-attach the PTB to the frame
using the T-pins.
9. OPTIONAL MAT CONVERSION
To install the mat on the frame disengage the springs and
move the carriage all the way to the head end of the Reformer.
Place the mat (upholstered side up) into the frame and slide the
wooden tongue of the mat under the standing platform on the
foot-end of the frame.
10. SAFETY AND MAINTENANCE
Safety
» To reduce the risk of serious injury, read the following
important precautions before using the Allegro 2 Tower
System.
» Read all instructions in this manual before using the Allegro 2
Tower System.
» Use the Allegro 2 Tower System only as described in these
instructions and the video.
» It is the responsibility of the owner to ensure that all users of
the Allegro 2 Tower System are adequately informed of all
precautions.
» Use the Allegro 2 Tower System only on a level surface.
» Keep hands and feet away from all moving parts. When the
Allegro 2 Tower System is not in use, leave at least two springs
connected to the carriage frame and make sure the PTB is
secured or removed
» Keep children under the age of 12 and pets away from the
Allegro 2 Tower System at all times.
» If you feel pain, dizziness, or shortness of breath, stop
exercising immediately.
» Before beginning any exercise program, consult your
physician.
Maintenance
» Depending on frequency of use, the springs should be safe to
use for one to two years (3000 hours). Replace any spring that
is kinked, bent or shows separations while at rest.
» Remove hair and debris from the axles of the wheels. Debris
can create pressure on the bearings, causing them to wear. If
you hear noise from the bearings, replace them. Otherwise, no
maintenance on the bearings is required.
» Repair any tears in the upholstery with an upholstery repair kit
available at auto parts stores, or have the repair done locally.
» Call Balanced Body for other upholstery and re-upholstery
options.
» Replacement upholstery is available from Balanced Body
» Replace any missing screws, retention pins, T-pins or other
parts.
» Tighten tower knobs monthly to ensure they are always tight.
Cleaning
» Wipe the carriage pad, headrest, footbar and shoulder rests
with a soft cloth and a mild, non-abrasive mixutre of soap and
water after each use.
» Keep the Tower, PTB, carriage track free from dust and dirt.
» Clean the frame with a mild, non-abrasive cleaner.
» Keep the ropes and springs clear of dust.
» Cotton loops can be machine-washed. Hang to dry.
Questions? Call Balanced Body Technical Support at
1-800-PILATES or +1-916-388-2838 or info@pilates.com.
Figure I