© 2018 Baker Hughes, a GE company, LLC. All rights reserved.
62 |
=
BHGE
Configuration
To perform configuration and calibration you can use either the pushbutton display, the HART
®
handheld communicator, a HART
®
Host with the DD loaded, or the ValVue ESD software. Refer to
“Pushbuttons and Local Display” on page 55 or the
SVI II ESD Instruction Manual SIL3
,
GEA18946
for instructions.
The following section describes configuration and calibration with the optional local display and
pushbuttons.
WARNING
These procedures can cause the valve to move. Before proceeding
be sure the valve is isolated from the process. Keep hands clear
from moving parts.
NOTE
In this document, all calibration and configuration procedures are
described using ValVue ESD software and an SVI II ESD with
pushbuttons and display.
