TBN480 CONDUCTIVITY TRANSMITTER
CREATE/MODIFY CONFIGURATION
G - 2
WBPEEUI110501A0
A configuration can be created off-line, without a connected field device. A
number of configurations can be created and stored in the terminal and sent
to a field device at a later time with
.
A series of
n
s may appear in the
Display
column of this instruction where
alphanumeric characters can be displayed or entered. The STT03E terminal
is assumed to be in the
READY
state when beginning the following proce-
dures
.
Figure G-1. Configuration Flowchart (TBN480)
CHOOSE A
RANGE JUMPER
SELECT
SENSOR
GROUP
IDTAG
SELECT MODE
DIGITAL
ANALOG
ENTER
CHANNEL
NUMBER
SELECT
TRANSMITTER
TYPE
SELECT
TEMPERATURE
COMPENSATION
EFFECT
SELECT DIAG
SPIKE NO/YES
ENTER
DAMPING
CONSTANT
SAVE
CONFIGURATION
SELECT
ANALYZER
TYPE
ENTER LOWER
RANGEVALUE
TP81004A
ENTER UPPER
RANGE VALUE
SELECT
INITIALIZE
MODE
SELECT FAIL
MODE
SELECT
TEMPERATURE
COMPENSATION
INPUT
C
O
N
F
I
G
U
R
E
SEND CONFIG
Key
Display
Comments
Select
NEW.
To create a new configuration.
To modify an
existing configuration, select
MODIFY.
The screen
sequence is the same, however, the
MODIFY
screens will
appear with the values and cursor positions as originally
configured.
A 14 character ID tag name is entered within the brackets.
Use the arrow keys to select characters. Use the right
arrow key to advance to the next character. When finished
entering a name, press
.
For this example select
ANALOG.
Select
cond TBN.
CONFIG
CONFIGURATION
→
NEW
MODIFY
ERASE
ENTER
STT03 CONFIG
[nnnnnnnnnnnnn]
ENTER
ENTER
SELECT MODE:
→
ANALOG
DIGITAL
ENTER
TRANSMITTER TYPE
→
cond TBN
pH TBN
ORP/pION
