INTRODUCTION
I-E96-607A
6 - 1
SECTION 6 - MAINTENANCE
INTRODUCTION
The reliability of any stand alone product or control system is
affected by the maintenance of the equipment. Bailey Controls
Company recommends that all equipment users practice a pre-
ventive maintenance program that will keep the equipment
operating at an optimum level.
This section presents procedures that can be performed
on-site. These preventive maintenance procedures should be
used as guidelines to assist you in establishing good preventive
maintenance practices. Select the minimum steps required to
meet the cleaning needs of your system.
•
Maintenance personnel should be qualified electrical tech-
nicians or engineers that know the proper use of test equip-
ment and how to handle electronic circuitry.
•
Maintenance personnel should be familiar with the
INFI-NET communication system, have experience working
with process control systems, and know what precautions
to take when working around live electrical systems.
WARNING
Never clean electrical parts or components with live power
present. Doing so exposes you to an electrical shock hazard.
AVERTISSEMENT
Ne jamais nettoyer des pièces ou composants électriques dont
les circuits sont sous tension; les circuits alimentés pourraient
causer un choc électrique.
WARNING
Wear eye protection whenever working with cleaning solvents.
When removing solvents from printed circuit boards using
compressed air, injury to the eyes could result from splashing
solvent as it is removed from the printed circuit board.
AVERTISSEMENT
Des lunettes de protection devraient être portées lors de travail
avec des solvants nettoyants. Lorsqu'on enlève les solvants
des circuits imprimés l'aide d'air comprimé, les éclaboussures
de solvant pourraient causer des blessures aux yeux.
