Bailey Infi 90 INIIR01, Instruction

Page: 67 / 95

TROUBLESHOOTING
EDGE CONNECTOR PIN ASSIGNMENTS
5 - 6 I-E96-607A
®
Table 5-7. INIIT02 Edge Connector P1 Pin Assignments
Pin Signal Pin Signal
1 +5 VDC 2 +5 VDC
3 No connection 4 Controlway
5 Common 6 Common
7 Not used 8 Not used
9 Power fail interrupt
1
10 Power fail interrupt
1
11 Controlway 1 12 No connection
NOTE: 1.Active low.
Table 5-8. INIIT02 Edge Connector P2 Pin Assignments
Pin Signal
1
Pin Signal
1
1 Data bit D1 2 Data bit D0
3 Data bit D3 4 Data bit D2
5 Data bit D5 6 Data bit D4
7 Data bit D7 8 Data bit D6
9 Clock 10 Sync
11 No connection 12 No connection
NOTE: 1.All data bits are active low.
Table 5-9. INIIT02 Edge Connector P3 Pin Assignments
Pin Signal Pin Signal
1 SAC/DCS link A (–) 16 SAC/DCS link A (+)
2 SAC/DCS link B (–) 17 SAC/DCS link B (+)
3 Redundancy transmit (–) 18 Redundancy transmit (+)
4 Redundancy transmit clock
(–) 19 Redundancy transmit clock
(+)
5 Redundancy receive (–) 20 Redundancy receive (+)
6 Redundancy receive clock
(–) 21 Redundancy receive clock
(+)
7 Receive A (–) 22 Receive A (+)
8 Receive B (–) 23 Receive B (+)
9 Clear to send A (–) 24 Clear to send A (+)
10 Clear to send B (–) 25 Clear to send B (+)
11 Transmit A (–) 26 Transmit A (+)
12 Transmit B (–) 27 Transmit B (+)
13 Request to send A (–) 28 Request to send A (+)
14 Request to send B (–) 29 Request to send B (+)
15 Digital output (+) 30 Digital output (–)