INTRODUCTION
REFERENCE DOCUMENTS
1 - 6
I-E96-315B
®
REFERENCE DOCUMENTS
SPECIFICATIONS
Number
Document
I-E92-501-2
Configuration/Tuning Terminal (CTT02)
I-E93-903
Configuration/Tuning Module (NCTM01)
I-E96-100
Operator Interface Station (IIOIS20)
Operation/Configuration
I-E96-200
Function Code Application Manual
I-E96-201
Multi-Function Processor Module (IMMFP01)
I-E96-202
Multi-Function Processor Module (IMMFP02)
I-E96-203
Multi-Function Processor Module (IMMFP03)
I-E96-211
Multi-Function Controller Module (IMMFC03)
I-E96-212
Multi-Function Controller Module (IMMFC04)
I-E96-213
Multi-Function Controller Module (IMMFC05)
I-E96-314
Frequency Counter Slave Module (IMFCS01)
I-E96-410
Digital Input Termination Module (NIDI01)
I-E96-424
Digital Input Termination Unit (NTDI01)
TP89-2
Analog Control Techniques and Tuning
GENERAL
Microprocessor
Process I/O
Digital I/O
System Communication
8 bit processor running at 4 MHz
2 analog inputs - LVDT secondary inputs 1 and 2. 3 analog outputs
- servo drive outputs 1 and 2, LVDT primary drive.
3 inputs - raise, lower, trip bias
1 output - emergency manual
8 bit parallel through the slave expander bus.
POWER REQUIREMENTS
Operating
Consumption
Surge Protection
+5 VDC @ 160 mA typical
+15 VDC @ 70 mA typical
-15 VDC @ 60 mA typical
+24 VDC @ 15 mA typical
5 VDC - 0.80 watts
+15 VDC - 1.05 watts
-15 VDC - 0.90 watts
+24 VDC - 0.36 watts
Meets IEEE-472-1974 Surge Withstand Capability Test.
