INTRODUCTION
HOW TO USE
I-E96-315B
1 - 3
Installation covers the preliminary steps to prepare the module
for operation. It covers switch settings, configuration and field
wiring.
The calibration section explains how to calibrate the module
with the LVDT and tune the control loop before placing it into
operation.
The operation section provides information on daily use,
start-up procedures and normal operation.
This section explains LED conditions, lists status messages
and shows corrective action when problems occur.
The maintenance section contains a table of scheduled mainte-
nance procedures.
This section explains the services and training that Bailey Con-
trols makes available to their customers.
Appendices
There are three appendices that provide a quick reference of
HSS module edge connector pin assignments, and explain how
to configure the NTDI01 Termination Unit and NIDI01 Termi-
nation Module.
HOW TO USE
Read this manual before handling the HSS. Refer to a specific
section for information as needed.
1. Read
before installing the HSS.
2. Read and do the steps in
.
3. Read and do the steps in
.
4. Refer to
for what to do if a problem occurs.
5. Refer to
for scheduled maintenance require-
ments.
6. Use
for a replacement parts list and warranty
information.
7. Refer to the appendices for a quick reference of termination
unit or module installation information.
