TROUBLESHOOTING
ON-LINE FAILURE
6 - 2
I-E96-315B
®
3. If the HSS continues to fail to calibrate and you cannot
locate the failure using the troubleshooting flowchart or the
steps in Table
, replace the hydraulic servo slave module.
4. If replacing the module does not correct the problem call
Bailey Controls for assistance.
ON-LINE FAILURE
This part of the troubleshooting section covers on-line failures
and how to troubleshoot them. On-line failures are those that
occur during the course of normal operation.
Figure 6-1. Off-Line Failure Troubleshooting Flowchart
(Page 1 of 3)
YES
NO
START
DONE
DONE
CALIBRATE
LVDT AND
ACTUATOR?
CONFIGURATION
ERRORS?
FC 150 SET FOR
CALIBRATION?
CALIBRATE
LVDT AND
ACTUATOR?
YES
NO
NO
NO
YES
YES
VERIFY FC 150
IS SET FOR
CALIBRATION
CHECK
HARDWARE
INSTALLATION
REMOVE HSS
MODULE FROM
MMU
TP25254A
A1
