INTRODUCTION
I-E96-315B
3 - 1
SECTION 3 - INSTALLATION
INTRODUCTION
This section covers the proper handling of electrostatic sensi-
tive devices, preliminary switch settings, termination unit or
module installation, slave module installation and configura-
tion. The steps in this section prepare the module for the cali-
bration and tuning procedures in
.
HANDLING
NOTE: Always use Bailey's Field Static Kit (P/N 1948385A1 - wrist
strap, ground cord assembly, alligator clip) when working with mod-
ules. The kit connects a technician and the static dissipative work
surface to the same ground point to prevent damage to the modules
by electrostatic discharge.
Special Handling
The slave uses electrostatic sensitive (ESD) devices. Follow
these handling procedures:
1. Keep the module in the special antistatic bag until you are
ready to install it in the system. Save the bag for future use.
2. Ground the antistatic bag before opening.
3. Ground all devices that connect to the module before using
them.
4. Avoid touching the circuitry when handling the modules.
General Handling
1. Examine the module immediately to verify that there is no
damage from shipping.
2. Notify the nearest Bailey Controls sales office of any
damage.
3. File a claim with the transportation company for any
damage to the shipment.
4. Use the original packing material and container to store the
module.
5. Store the module in an environment of good air quality and
free from temperature and moisture extremes.
