manualshive.com logo in svg

Bacharach PCA 2 24-9448, Operating & Maintenance Instructions

Share
Download
Bacharach PCA 2 24-9448 Operating & Maintenance Instructions Download Page 61

Instruction 24-9448

4-27

Operation

4.14.4  Unplugging the USB Cable

CAUTION:

 To avoid possible electronic damage to the ana-

lyzer, it is 

not

 advisable to unplug the USB cable without 

first turning OFF the PCA 2 USB connection using the 

“Safely Remove Hardware” icon in the Windows XP system 

tray.

Do the followng before unpluggng the 

USB cable:

1.  Double-clck the “Safely Remove 

Hardware” con n the Wndows XP 

 system tray.

2.  If more than one USB devce s 

plugged nto the computer, select 

the devce labeled “Bacharach PCA2 

USB drver” and then clck 

Stop

.

3.  Clck 

OK

 to confrm that the devce 

s to be stopped.

4.  Wat untl “Bacharach PCA2 USB 

drver” s removed from the screen, 

and then clck 

Close

.

5.  The USB cable can now be safely 

unplugged.

Safely Remove

Hardware Icon

Summary of Contents for PCA 2 24-9448













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands