Bacharach PCA 2 24-9448 Operating & Maintenance Instructions Download Page 19

Page: 19 / 108

Instruction 24-9448

2-3

Specifications

Power Requirements:

Four dsposable ‘AA’ alkalne batteres provde at least 15 hours of contnu-

ous operaton. NMH rechargeable batteres can also be used, wth the

operatng tme dependent on battery type and condton.

An optonal AC power adapter, whch runs from any convenent source of

100–240 VAC, 50/60 Hz power, can be used to power the analyzer on a con-

tnuous bass. If usng rechargeable batteres, the AC power adapter can also

be used to charge the batteres whle nsde the analyzer.

Warm-Up Time:

60 seconds. Sensors are checked and auto zeroed durng warm-up.

Memory:

• 500 complete combuston test records

• 500 complete logged combuston test records

Interfaces:

• Prnter – Infrared (IrDA) communcatons

• Computer – USB

Dimensions:

9H x 3W x 2.5D nches (22.9 x 7.6 x 6.3 cm)

Weight:

• Analyzer – 1.4 lb (0.6 kg) w/ batteres

• Probe & Hose Assembly – 1 lb (0.5 kg)

Summary of Contents for PCA 2 24-9448













































































































Search results

Summary of Contents for PCA 2 24-9448

Reviews:

Related manuals for PCA 2 24-9448

Brands by name

Popular brands

Bacharach PCA 2 24-9448, Operating & Maintenance Instructions

Search results

Summary of Contents for PCA 2 24-9448

Reviews:

Related manuals for PCA 2 24-9448

Brands by name

Popular brands