Bacharach PCA 2 24-9448, Operating & Maintenance Instructions

Page: 58 / 108

Instruction 24-9448 4-24
Operation
6. After the Found New Hardware Wzard has fnshed nstallng the
software, clck
Finish
to close the Wzard.
4.14.3 Recovering Data
Before data can be recovered from the analyzer, nstall the PCA 2 Data
Recovery Program, USB cable, and USB devce drver as descrbed n Sec-
tons 4.14.1 and 4.14.2.
Recover ether the loggng or combuston data as follows:
1. Start the program by ether double-clckng the PCA2 con
on the Wndows desktop, or clckng the PCA2 shortcut n
start menu. The “Bacharach PCA 2 Data Recovery Program”
wndow should appear.
Observe that the wndow s dvded nto two sectons. The left-hand
secton s used to recover loggng data, whle combuston data s recov-
ered from the rght-hand secton.
In the followng steps, the loggng data wll be recovered. The same
procedure can be used to recover combuston data usng the rght-hand
secton of the wndow.
2. Select where the downloaded fle contanng the recovered data wll be
located and gve t a flename by clckng the Open Log File button. The
followng example screens show that the downloaded fle wll be placed
nto a pre-exstng PCA2 Logging Data folder and gven the flename
Customer XYZ.