Baby Lock Destiny BLDY Instruction And Reference Manual Download Page 64

Page: 64 / 225

CONFIRMING THE PATTERN POSITION

257

Bas
ic Em

ide
ry

Press

to adjust the positions.

→

If you don’t need to adjust the positions, continue to
step

Press

to move the LED pointer on

the fabric for adjusting the first position.

Press

to apply the setting.

Press

to move the LED pointer on

the fabric for adjusting the second position.

Press

to apply the setting.

The preview in the screen is updated

according to the specified embroidering
position.

Press the “Start/Stop” button to start

embroidering.

Checking the Pattern Position

The embroidery frame moves and shows the
pattern position. Watch the frame closely to make
sure the pattern will be sewn in the right place.

Press .

→

The following screen is displayed.

Note

• When using the sensor pen to specify the

embroidering position, it may not be
possible to exactly specify the desired
location. In this case, move the embroidery
frame to align the center of the pattern with
the location indicated by the LED pointer.

Summary of Contents for Destiny BLDY


































































































































































































































Search results

Summary of Contents for Destiny BLDY

Reviews:

Related manuals for Destiny BLDY

Brands by name

Popular brands

Baby Lock Destiny BLDY, Instruction And Reference Manual

Search results

Summary of Contents for Destiny BLDY

Reviews:

Related manuals for Destiny BLDY

Brands by name

Popular brands