Baby Lock Destiny BLDY, Instruction And Reference Manual

Page: 5 / 225

BEFORE EMBROIDERING
198
a
Turn the main power to OFF, and remove
the flat bed attachment.
b
Insert the embroidery unit connection into
the machine connection port. Push lightly
on the connection port cover until the unit
clicks into place.
a Embroidery unit connection
b
Machine connection port
c
Turn the main power to ON.
→
The following message will appear.
d
Press .
→
The carriage will move to the initialization position.
■
Removing the Embroidery Unit
a
Press , then press .
→
The carriage will move to the removal position.
b
Turn the main power to OFF.
Note
• You can also sew utility/decorative stitches
with the embroidery unit attached. Touch
and . The feed dog will
automatically raise for utility and decorative
stitching.
• Be sure to turn off the power before
installing the embroidery unit. Otherwise,
the machine may be damaged.
• Do not touch the inner connector of the
embroidery unit. The pins on the
embroidery unit connection may be
damaged.
• Do not apply strong force to the embroidery
unit carriage or pick up the unit by the
carriage. Otherwise, the embroidery unit
may be damaged.
• Store the embroidery unit in a safe place to
prevent damage to the unit.
Note
• Be sure there is no gap between the
embroidery unit and the sewing machine. If
there is a gap, the embroidery patterns will
not embroider with the correct registration.
• Do not push on the carriage when installing
the embroidery unit onto the machine.
Moving the carriage may damage the
embroidery unit.
CAUTION
• Always remove the embroidery frame before
pressing . Otherwise, the frame may
strike the embroidery foot, and possibly cause
injury.
Note
• Be sure to turn off the machine before
removing the embroidery unit, otherwise
damage to the machine may result.