Baby Lock Destiny BLDY Instruction And Reference Manual Download Page 13

Page: 13 / 225

SELECTING PATTERNS

206

Insert the card completely into the card
reader/USB card writer module.

Insert the embroidery card so that the end with a
printed arrow is facing up.

Press .

→

The patterns on the embroidery card are displayed
on the selection screen.

Press the key of the pattern you want to
recall.

Press

to return to the original screen.

Press .

Note

• Two embroidery USB card readers/USB

card writer modules cannot be used with
this machine at the same time. If two
embroidery USB card readers/USB card
writer module are inserted, only the
embroidery USB card reader/USB card
writer module inserted first is detected.

Summary of Contents for Destiny BLDY


































































































































































































































Search results

Summary of Contents for Destiny BLDY

Reviews:

Related manuals for Destiny BLDY

Brands by name

Popular brands

Baby Lock Destiny BLDY, Instruction And Reference Manual

Search results

Summary of Contents for Destiny BLDY

Reviews:

Related manuals for Destiny BLDY

Brands by name

Popular brands