Baby Lock Destiny BLDY Instruction And Reference Manual Download Page 24

Page: 24 / 225

EDITING PATTERNS

217

Bas
ic Em

ide
ry

Change the size of letters.

→

Selected letter will be resized.

Press

if the resize keys are not displayed.

Select the direction in which to change the
size, or press

→

Refer to “Changing the Size of the Pattern” on
page 214 about selecting the direction.

Press

to change font type, and then

select the font type.

→

Selected letter's font type will be changed.

Press .

Changing the Density
(Alphabet Character and Frame
Patterns Only)

The thread density for some alphabet character
and frame patterns can be changed.
A setting between 80% and 120% in 5%
increments can be specified.

Press .

Summary of Contents for Destiny BLDY


































































































































































































































Search results

Summary of Contents for Destiny BLDY

Reviews:

Related manuals for Destiny BLDY

Brands by name

Popular brands

Baby Lock Destiny BLDY, Instruction And Reference Manual

Search results

Summary of Contents for Destiny BLDY

Reviews:

Related manuals for Destiny BLDY

Brands by name

Popular brands